The 4-port SATA3 RAID HyperDuo PCIe host adapter is designed to fit the Most Advanced SATA Specifications, SATA III provides the best performance and reliability in today’s computing standards.
Besides RAID 0, 1 and 0+1 modes, the CG-PCIeS3-i4p MSU supports HyperDuo modes that allow the SSD and a SATA drive to increase its reliability (Safe mode) or optimize the maximum utilization of the SSD (Capacity mode).
PCI Express provides a scalable, high-speed, serial I/O bus that maintains backward compatibility with PCI applications and drivers. Its architecture defines a high-performance, point-to-point, scalable, serial bus at speed of 500Mbytes/sec to 4GBytes/sec (and 8Gbytes/sec in the future).
High transfer rate is supported up to 1,000MB/S (2 lanes) for large imaging data file applications. It breaks the bottleneck and extends the bandwidth of the current data I/O.
Available 2-lane PCI Express slot for Gen2 Systems
PCI Express Interface
Compliant with PCI Express Specifications 2.0
Serial ATA Ports
4 SATA3 ports which fully support devices up to 6.0Gb/s data transfer rate.
Supports Hot-Plug and Hot-Swap Features.
Supports Port Multiplier Based on FIS Switching.
Onboard ROM BIOS Supports Boot and RAID Re-build Features
Supports SATA Devices in RAID 0, 1 and RAID 0+ 1 Modes
MSU supports HyperDuo Modes: Safe and Capacity Modes
Supports Native Command Queuing (NCQ)
Supports two double-deck (4 ports total) internal SATA connectors.
Windows 2000, XP, 2003, Vista and Win 7
3.11” x 1.89” (7.90cm x 4.80cm)